3M™ Double Coated Urethane Foam Tape 4056 is a black, 0.0625 in. (1.6 mm) thick, double coated, open cell urethane foam tape that offers high shear strength. It is ideal for applications such as mounting interior signage and nameplates along with soap dispensers and air fresheners.
Unit of Measure
Additional Information |
N/A
Versatile Bonding 3M™ Double Coated Urethane Foam Tape 4056 is a 1/16 in. thick tape manufactured with 3M™ Adhesive 100 for a strong, permanent bond that works well with the open cell foam structure to produce high shear strength. This tape offers an ideal solution for a wide selection of bonding issues on various surfaces. This includes both interior and exterior applications where the tape will be protected from the environment. This tape features a conformable foam and adhesive combination which provides long-term holding at Temperatures up to 220ºF (104ºC). By using a robust, green plaid, densified kraft Paper liner, this tape provides you with reliable performance for industrial applications, such as die-cutting and automated dispensers. The liner also helps reduce edge roll and protects the tape from humidity extremes. Recommended Applications
3M™ Adhesive 100 is a firm, acrylic, pressure sensitive adhesive system that features high ultimate bond strength, very good high Temperature, solvent resistance and very high shear holding power. Bond strength increases substantially with natural aging. 3M™ Adhesive 100 is well known in the industry for environmental and chemical resistance. For many applications, any one of the products in this grouping will perform satisfactorily when exposed to different chemicals or Temperatures. The adhesive offers excellent bond to metal and high surface energy plastics and good Temperature and chemical resistance. What is Double Coated Tape? In general, double coated tape is composed of a Paper, film, or tissue carrier that is coated on both sides with pressure sensitive adhesive. The adhesive is protected by a peel-away liner that can be removed at the time of application or left in place until the joining surfaces are ready to be attached. These tapes can be applied by hand or with a dispenser. Double coated tape dispensers are available in a variety of configurations ranging from manual to fully automatic. Applications for double coated tape are found in construction, fabrication, arts, and hobby. |
3M ID (Stock Number) |
N/A 7000123321 7000123323 7000123324 7100009913 |
Consumer UPC |
N/A 00021200145582 |
Legacy (Stock Number) |
N/A 70000014319 70-0000-1431-9 70006055860 70006056405 70006056603 |
Sales UPC |
N/A 00021200145582 00021200146190 00021200146688 |
Country of Origin |
N/A USA |
ECCN Number |
N/A EAR99 |
Product Details |
N/A 3M™ Double Coated Urethane Foam Tape 4056, Black, 36 yds, 62 mil, 12 Rolls Per Case 3M™ Double Coated Urethane Foam Tape 4056, Black, 36 yds, 62 mil, 18 Rolls Per Case 3M™ Double Coated Urethane Foam Tape 4056, Black, 36 yds, 62 mil, 9 Rolls Per Case 3M™ Double Coated Urethane Foam Tape 4056, Black, 62 mil, Roll, Configurable |
EU REACH |
N/A This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective July 2019. |
EU RoHS |
N/A This product does not exceed the maximum concentration values (MCVs) for phthalates set under EU Directive 2011/65/EU (RoHS recast/RoHS 2), as amended by EU 2015/863, which applies to finished EEE after July 22, 2019 for Category 1-7, 10-11 products and after July 22, 2021 for Category 8 and 9 products. This means that each of the homogeneous materials within this product does not exceed the MCV of 0.1% (by weight) for each of the following phthalates: DEHP, BBP, DBP, and DIBP. |
Features |
N/A
|
