3M™ All Weather Flashing Tape 8067 is a self-adhered, waterproof flashing membrane designed for sealing around openings and penetrations in exterior walls. This product has a unique acrylic pressure sensitive adhesive that aggressively sticks and stays stuck both at lower and higher application temperatures than traditional flashing tapes. It even adheres to damp surfaces.

Our 3M™ Damping Foil Tape 2552 is constructed of a dead soft aluminum foil constraining layer and coated with a pressure sensitive, viscoelastic acrylic polymer adhesive. This unique construction provides the ability to control resonant vibrations in a variety of applications and across a broad spectrum of temperatures.

3M™ High Temperature Nylon Tape 855, used for advanced composite and metal bond masking, used in many composite bagging operations or to help remove flashing after composite bonding

3M™ Lithographers Tape 616 is an optically transparent and photographically opaque tape primarily designed for many lithographic stripping applications in the graphic arts industry. It is available in a wide selection of widths and lengths to meet almost any demand.

3M™ Photographic Tape 235 is an opaque black paper tape used in general purpose photography applications. It has a black paper backing with black pigmented rubber adhesive and can be used to mask negatives, repair camera bellows or seal envelopes and metal film containers.

3M™ Polyester Tape 8412, used for many permanent edging and reinforcing types of applications, printing plate, registration hole reinforcement, applications requiring puncture resistance

3M™ Riveters Tape 685, used in holding rivets in place both prior to and during riveting, no adhesive transfer to rivet heads, polyester film resists shattering and slivering

3M™ Splicing Tape 253 is a single-coated paper tape with a modified poly liner implemented on the face side of the tape to help ensure roll quality and provide protection against contamination. This tape is ideal for silicone and plastic based material splicing and butt splicing applications.

Our 3M™ Vent Tape 394 features a unique, non-woven synthetic backing with high air/gas permeability, good burst strength and solids barrier for minimal voids and less clean up.

3M™ Venting Tape 3394, used in a variety of venting applications, allow the confinement and outgassing of foam insulation, non-woven backing for conformability

3M™ Venting Tape 3294 is a pink non-woven, synthetic backing with a strip-coated low-tack pressure sensitive acrylic adhesive for use in various venting applications requiring high outgassing rates.

Used under the head of the twist bolt when mounting signs with High Intensity or Diamond Grade™ sheetings.

3M™ Metalized Film Tape 8437 is comprised of a relatively thin polyester backing with a metalized coating on both side of the film providing a mirror-like finish with low emissivity and a versatile, long lasting acrylic adhesive. A silicone coated release liner helps with ease of handling and allows for large area applications and die-cutting custom shapes.

3M™ Vinyl Foam Tape 4504 0.250 inch (6.4mm) thick black, high-density, closed cell foam with pressure sensitive acrylic adhesive. A 0.003 inch (0.08mm) thick white, silicone treated paper liner is applied to the non-adhesive side of the foam so the PVC can be cut to length and applied while leaving the liner in place.