3M™ Tape Primer 94 can be used to improve the overall adhesion of tape, film and vinyl graphics to polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces.
Unit of Measure
Additional Information |
N/A
Dries in Minutes for Efficient Use Make sure your surface is clean and dry before applying a thin, uniform coat of 3M™ Tape Primer 94. The primed surface must remain free from contaminants prior to applying the tape. It's important to use the minimum amount of product necessary as over applying can cause sub-optimal results. Allow the primer to dry completely, which is usually accomplished in 5 minutes at room Temperature, before applying tape. Special note: porous surfaces may require 2 applications for uniform coverage and good adhesion. Allow your first application of primer to dry before applying a second coat. Recommended Applications
3M™ Tape Primer 94 may be applied with a brush, swab, pressurized flow gun, knurled roller or similar type of equipment and can be removed with isopropyl alcohol. Vigorous scrubbing may be required. |
3M ID (Stock Number) |
N/A 7000001579 7000001583 7000001584 7000050137 7100003278 |
Consumer UPC |
N/A 00021200239267 00021200239298 00021200239304 00021200242168 |
Legacy (Stock Number) |
N/A 70016047824 70016054762 70016054770 70016054788 70016054846 |
Sales UPC |
N/A 00021200239267 00021200239298 00021200239304 00021200242168 50021200462011 |
Country of Origin |
N/A USA |
ECCN Number |
N/A EAR99 |
Product Details |
N/A 3M™ Tape Primer 94, Light Yellow, 0.66 mL, Ampule, 1000 Per Case 3M™ Tape Primer 94, Light Yellow, 1 Gallon Drum (Can), 4 Per Case 3M™ Tape Primer 94, Light Yellow, 1 Quart Can, 12 Per Case 3M™ Tape Primer 94, Light Yellow, 1/2 Pint Can, 12 Per Case 3M™ Tape Primer 94, Light Yellow, 5 Gallon Drum (Pail), 1 Per Case |
EU REACH |
N/A This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective July 2019. |
EU RoHS |
N/A This product does not exceed the maximum concentration values (MCVs) for phthalates set under EU Directive 2011/65/EU (RoHS recast/RoHS 2), as amended by EU 2015/863, which applies to finished EEE after July 22, 2019 for Category 1-7, 10-11 products and after July 22, 2021 for Category 8 and 9 products. This means that each of the homogeneous materials within this product does not exceed the MCV of 0.1% (by weight) for each of the following phthalates: DEHP, BBP, DBP, and DIBP. |
Features |
N/A
|
