3M™ Double Coated Tape 444 features our 3M™ Adhesive 300, a medium-firm acrylic adhesive ideal for joining materials that are smooth, thin and have low residual stress. It is excellent for foams and LSE plastics such as polyethylene, as well as HSE plastics. Adhesive is applied to both sides of a 0.5 mil PET film which adds structural stability. This tape features a 55# densified kraft liner.
Unit of Measure

Additional Information

N/A A Double Coated Tape for Foams and LSE Plastics
Excellent for textured plastics, foams, fabrics and coated Papers, 3M™ Double Coated Tape 444 features 3M™ Adhesive 300 on a 0.5 mil polyester (PET) film carrier. The medium-firm acrylic adhesive delivers high initial and final adhesion for efficient laminating procedures. The durable polyester film carrier between the adhesive layers improves the handling and strength of the tape, and adds stability during processes such as die-cutting and slitting. The adhesive is applied at 1.4 mils on the liner side and 2 mils on the face side for effective wet-out. The 55# densified kraft Paper release liner makes for fast, efficient application.

About Our 3M™ Adhesive 300
3M™ Adhesive 300 is a medium-firm acrylic adhesive system featuring both high initial adhesion and good UV and chemical resistance and strong holding power. The design of the adhesive results in high initial adhesion and good Temperature performance. The formulation gives 3M™ Adhesive 300 a consistently strong bond across a range of Temperatures up to 250ºF/121ºC short term.

Recommended Applications:
  • Medical diagnostic test strips
  • Plastic film lamination/bonding
  • Splicing
  • Foam lamination
  • Gasket attachment
What is Double Coated Tape?
In general, double coated tape is composed of a Paper, film, or tissue carrier that is coated on both sides with pressure sensitive adhesive. The adhesive is protected by a peel-away liner that is removed at the time of application. These tapes can be applied by hand or with a dispenser. Double coated tape dispensers are available in a variety of configurations ranging from manual to fully automatic. Applications for double coated tape are found in electronics, automotive, aerospace, general industrial, and fabrication markets.

Bringing Better Ideas to the Surface through Science
In our 3M™ Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.

3M ID (Stock Number)

N/A 7000048420 7000048428 7000048429 7010291442 7010302009 7010302051 7010373267 7010374024 7100000154

Consumer UPC

N/A 00021200461439

Legacy (Stock Number)

N/A 70000003098 70006026283 70006028917 70006030442 70006030459 70006042199 70006145604 70006226743 70006290327

Sales UPC

N/A 00021200046018 00021200047213 00021200048418 00021200048425 00021200116636 00021200377228 00021200461439 00021200876141 04046719525744

Country of Origin

N/A USA

ECCN Number

N/A EAR99

Product Details

N/A 3M™ Disposable Protective Oversleeve 444, Universal Size, 150 Pairs Each/Case 3M™ Double Coated Tape 444, Clear, 108 yds, 3.9 mil, 1 Roll Per Case 3M™ Double Coated Tape 444, Clear, 3.9 mil, Roll, Configurable 3M™ Double Coated Tape 444, Clear, 36 yds, 3.9 mil, 12 Rolls Per Case 3M™ Double Coated Tape 444, Clear, 36 yds, 3.9 mil, 24 Rolls Per Case 3M™ Double Coated Tape 444, Clear, 36 yds, 3.9 mil, 36 Rolls Per Case 3M™ Double Coated Tape 444, Clear, 36 yds, 3.9 mil, 4 Rolls Per Case 3M™ Double Coated Tape 444, Clear, 36 yds, 3.9 mil, 48 Rolls Per Case 3M™ Double Coated Tape 444, Clear, 36 yds, 3.9 mil, 72 Rolls Per Case

EU REACH

N/A This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective July 2019.

EU RoHS

N/A This product does not exceed the maximum concentration values (MCVs) for phthalates set under EU Directive 2011/65/EU (RoHS recast/RoHS 2), as amended by EU 2015/863, which applies to finished EEE after July 22, 2019 for Category 1-7, 10-11 products and after July 22, 2021 for Category 8 and 9 products. This means that each of the homogeneous materials within this product does not exceed the MCV of 0.1% (by weight) for each of the following phthalates: DEHP, BBP, DBP, and DIBP.

Features

N/A
  • Excellent for foam and gasket attachment, HSE and LSE plastics such as polyethylene
  • Quick flowing adhesive delivers high initial adhesion for faster lamination
  • 0.5 mil PET film carrier adds dimensional stability and easier handling during slitting and die-cutting
  • 3M™ Adhesive 300 aggressively bonds to many surfaces, including plastics like polyethylene
  • 55# 3.2 mil densified kraft liner makes for easy release