3M™ All Weather Flashing Tape 8067 provides a weather-resistant barrier around windows and doors. Tape will adhere when applied in extreme temperatures beyond the range of traditional asphaltic or butyl flashing tapes: as low as 0ºF or as high as 120ºF. Aggressive adhesive will adhere to most common building materials, even at both ends of the temperature range or when damp. And it will not stain or bleed. This tape resists punctures and will self-seal around nails and staples, but is thin enough to fit easily into corners or under siding. Split liner promotes easier installations by allowing partial removal. Tape is available in 4 inch, 6 inch and 9 inch wide rolls.
3M™ Damping Foil Tape 2552 helps damp vibrations on metal and plastic surfaces vibrating at their natural (resonant) frequency, consists of a pressure-sensitive viscoelastic polymer and aluminum foil constraining layer that effectively converts vibrational energy to negligible heat to reducing irritating noises and decreasing wear and tear on parts. Optimal temperature range from 32°F to 140°F (0°C to 60°C).
(3)
3M™ High Temperature Nylon Tape 855, used for advanced composite and metal bond masking, used in many composite bagging operations or to help remove flashing after composite bonding
3M™ Photographic Tape 235, opaque paper tape used in general purpose camera applications, masking out unwanted portions of negatives, repairing camera bellows, sealing film envelopes and metal film containers
3M™ Polyester Tape 8412, used for many permanent edging and reinforcing types of applications, printing plate, registration hole reinforcement, applications requiring puncture resistance
(2)
3M™ Riveters Tape 685, used in holding rivets in place both prior to and during riveting, no adhesive transfer to rivet heads, polyester film resists shattering and slivering
(2)
3M™ Silicone Splicing Tape 253, single coated paper tape with a modified poly liner on the face side of the tape added to help ensure roll quality, ease of unwind and protection of the adhesive against contamination until the splice is ready to be made, used in butt-splicing many paper and plastic based materials, ideal for splicing many silicone treated materials
3M™ Venting Tape 3394, used in a variety of venting applications, allow the confinement and outgassing of foam insulation, non-woven backing for conformability
3M™ Polyester Tape 8437, ideal for applications where reflectivity and low emissivity are desired. Excellent for splice detection and can be used for applications requiring a conductive surface.
(3)
3M™ Vinyl Foam Tape 4504 0.250 inch (6.4mm) thick black, high-density, closed cell foam with pressure sensitive acrylic adhesive. A 0.003 inch (0.08mm) thick white, silicone treated paper liner is applied to the non-adhesive side of the foam so the PVC can be cut to length and applied while leaving the liner in place.