High performance. Polypropylene backing reinforced with continuous glass yarn. Typical 300 lb/inch width tensile strength with aggressive adhesive for low unit cost, medium-duty closure, reinforcing, and holding.
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 

Part #

Description 

Sort by
N/A High performance. Black polypropylene backing reinforced with continuous glass filaments. Typical 300 lb/inch width tensile strength. Good initial and long-term adhesion; high shear strength. Black backing protects tape from UV rays.

Polypropylene backing is easy to handle and dispense. Provides excellent resistance to abrasion and moisture. Specially formulated hot melt adhesive holds instantly with rubdown. Bonds with good initial and long-term adhesion and high shear strength. Applications: Low unit cost bundling of metal conduit and pipe, tubes, rigid and flexible plastic pipe. Holding last lap of large rolls of paper or metal stored outdoors. Typical Physical Properties:- Low 4.5% elongation at break to help keep bundles tight.- 55 oz/inch adhesion to steel.- Black backing protects tape against sunlight and ultraviolet rays for good outdoor weathering.- Standard width: 18 mm
N/A High performance. Polyester backing reinforced with continuous glass yarn. Stain resistant adhesive. Typical 380 lb/inch width tensile strength with high shear adhesive for low unit cost heavy-duty closure, reinforcing, and holding.

Polypropylene backing is easy to handle and dispense and provides excellent resistance to nicks, abrasion, moisture and scuffing. Specially formulated synthetic rubber resin adhesive bonds with good initial adhesion, high shear strength, and excellent aging on package surfaces. Applications:- Preferred construction for L-Clip closure and reinforcement of five panel folder, full overlap, full telescoping, and clamshell corrugated boxes. Use with 3M-Matic™ L-Clip Applicator S857 and Scotch® Manual L-Clip Filament Tape Dispenser S634. Can be custom printed using the 3M-Matic™ Print and Seal process. Typical Physical Properties:- Low 3% elongation at break to help keep bundles tight. 50/70 oz/inch adhesion to steel- Bar codes, type and graphics show through translucent backing.- Standard widths: 6, 9, 12, 15, 18, 24, 36, 48, and 72 mm.
N/A High performance. Polypropylene backing reinforced with continuous glass yarn with stain resistant finish. Typical 380 lb/inch width tensile strength with aggressive high shear adhesive for heavy duty closure, reinforcing, and banding.

Polypropylene backing is easy to handle and dispense and provides excellent resistance to nicks, abrasion, moisture and scuffing. Specially formulated synthetic rubber resin adhesive bonds with good initial adhesion, high shear strength, and excellent agi
N/A High performance. Polypropylene backing reinforced with continuous glass yarn with stain resistant finish. Typical 380 lb/inch width tensile strength with aggressive high shear adhesive for heavy duty closure, reinforcing, and banding.

Polypropylene backing is easy to handle and dispense and provides excellent resistance to nicks, abrasion, moisture and scuffing. Specially formulated synthetic rubber resin adhesive bonds with good initial adhesion, high shear strength, and excellent aging on package surfaces.Applications:- Preferred construction for L-Clip closure and reinforcement of five panel folder, full overlap, full telescoping, and clamshell corrugated boxes. Use with hand-held manual dispensers, definite length table top dispensers and automatic L-Clip applicators. Can be custom printed using the 3M-Matic™ Print and Seal process.Typical Physical Properties:- Low 3% elongation at break to help keep bundles tight. 70 oz/inch adhesion to steel- Bar codes, type and graphics show through translucent backing.- Standard widths: 6, 9, 12, 15, 18, 24, 36, 48, and 72 mm.
N/A High performance. Polypropylene backing reinforced with continuous glass yarn. Typical 300 lb/inch width tensile strength with aggressive adhesive for low unit cost, medium-duty closure, reinforcing, and holding.

Polypropylene backing is easy to handle and dispense. Provides excellent resistance to nicks, abrasion and moisture. Specially formulated hot melt adhesive provides good balance of adhesion properties: good initial and long-term adhesion, and high shear strength to package surfaces. Applications:- Bundling, reinforcing, and palletizing- L-clip closures with the 3M-Matic™ L-Clip Applicator S857 and Scotch® Manual L-Clip Filament Tape Dispenser S634- Can be custom printed using the Print Seal™ process. Typical Physical Properties:- Low 4.5% elongation at break to help keep bundles tight- 55 oz/inch adhesion to steel- Type and graphics show through translucent backing- Standard widths: 9, 12, 18, 24, 36, and 48 mm
N/A High performance. Polypropylene backing reinforced with continuous glass yarn. Typical 380 lb/inch width tensile strength. High shear adhesion for low unit cost, heavy-duty closure of hard-to-adhere or high recycled content fiberboard.

Polypropylene backing is easy to handle and dispense and provides excellent resistance to nicks, abrasion and moisture. Specially formulated hot melt adhesive bonds with exceptional balance of adhesion properties to fiberboard surfaces.Applications:- Good initial adhesion, high shear strength, and excellent aging on critical applications involving difficult-to-adhere fiberboard or fiberboard with high recycled content.- Low unwind levels for easy use with manual dispensers, the Scotch® L-Clip Dispenser S634, or the 3M-Matic™ L-Clip Applicator S857.- Can be custom printed using the Print Seal™ process. Typical Physical Properties:- Low 3% elongation at break to help keep bundles tight.- 70 oz/inch adhesion to steel. - Bar codes, type and graphics show through translucent backing.- Standard widths: 9, 12, 18, 24, 36 and 48 mm
N/A High performance. polypropylene backing reinforced with glass filaments. Typical 170 lb/inch width tensile strength for light- to medium-duty bundling, reinforcing, and palletizing. Good initial and long-term adhesion with good shear strength.

Polypropylene backing provides excellent resistance to nicks, abrasion, moisture, and scuffing. Glass filaments reinforce tape for reliable strength. Specially formulated rubber resin adhesive bonds with minimum rubdown. Good initial and long-term adhesion with good shear strength.Applications:- Light to medium-duty bundling, reinforcing, palletizing, and strapping.Typical Physical Properties:- Low 3% elongation at break to help keep bundles tight.- 60 oz/inch adhesion to steel.- Bar codes, type and graphics show through translucent backing.- Standard widths: 9, 12, 18, 24, 36, and 48 mm
N/A High performance. White polypropylene backing for printing, reinforced with continuous glass filaments. Nick resistant. 240 lb/inch width tensile strength with good initial adhesion and high shear strength. Low stretch for handling ease.

White polypropylene backing provides an excellent printing surface with resistance to nicks, abrasion, moisture and scuffing. Low stretch for handling ease. Specially formulated rubber resin adhesive bonds with good initial adhesion and high shear strength.Applications:- Closing, reinforcing, bundling, and palletizing- Custom printed L-clip security closures- Color-compatible sealing of center seams on white heavy-duty corrugated RSCs- Can be custom printed using the Print Seal™ processTypical Physical Properties:- Low 3% elongation at break to help keep bundles tight- 50 oz/inch adhesion to steel- Standard widths: 9, 12, 18, and 24 mm
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1